基于企业微信的宁波市地震应急工作助手的设计与实现     

张蓓蕾  彭骁  董君磊  李杲  周浩波 《地震地磁观测与研究》2020,41(4):251-263

通过分析市县地震部门的地震应急组织机构、主要职能、关键流程，设计了地震应急工作助手的需求方案。并应用ASP.NET MVC、HTML5等开发技术，基于企业微信，开发了包括震情服务、灾情服务、应急服务、工作报告、资料查询、通知公告、通信录等7大功能的地震应急工作助手软件。该软件具有相对机动灵活、成本低、易于推广使用的优势。多次地震应急演练使用表明，软件能在较大程度上提高地震应急工作的规范化程度和处置效率。  相似文献   

结构震后残余位移研究进展          下载免费PDF全文

刘巴黎  胡进军 《世界地震工程》2020,(3):131-140

结构在强震作用下进入非线性阶段会产生不可恢复的永久位移或残余变形，结构残余位移是震后结构抗震性能和地震损失评估的重要参数，具有重要的理论意义和工程实用价值。为了深入分析残余位移的研究现状，为面向性态抗震设计和抗震韧性评估的地震动强度指标研究提供参考，全面和系统分析了国内外结构残余位移相关文献，介绍了残余位移的定义，重点论述了影响结构残余位移的主要因素，总结归纳了残余位移计算模型、残余位移控制方法及考虑残余位移的抗震性能评估方法，最后讨论了残余位移研究中存在的问题和建议。  相似文献   

SOURCE PARAMETERS OF THE CANGWU M_S5.4 EARTHQUAKE, 31 JULY, 2016          下载免费PDF全文

ZHOU Yi  YAN Chun-heng  XIANG Wei  ZHOU Bin  WEN Xiang 《地震地质》2019,41(1):150-161

On July 31^st, 2016, an earthquake of M_S5.4 occurred in Cangwu County, Guangxi Zhuang Autonomous Region, which is the first M_S ≥ 5.0 earthquake in coastal areas of southern China in the past 17a. The moderate earthquake activities have come into a comparatively quiet period in coastal areas of southern China for decades, so the study about the Cangwu M_S5.4 earthquake is very important. However, differernt research institutions and scholars have got different results for the focal depth of the Cangwu M_S5.4 earthquake. For this reason, we further measured the focal depth by using CAP method and sPL phase method. sPL phase was first put forward by Chong in 2010. It is often observed between P and S wave of continental earthquakes with epicentral distance of about 30km to 50km. The energy of sPL phase is mainly concentrated on the radial component. Arrival time difference between sPL phase and direct P wave is insensitive to epicentral distancs, but increases almost linearly with the increase of focal depth. Based on these characteristics and advantages, sPL phase method is chosen to measure the focal depth of Cangwu M_S5.4 earthquake in the paper. First of all, we selected the broadband waveform data through seismic stations distributed mainly in Guangxi and adjacent provinces from Data Management Centre of China National Seismic Network and Guangxi Earthquake Networks Center. And an appropriate velocity model of Cangwu area was constructed by the teleseismic receiver function method. Then, the focal mechanism and focal depth of Cangwu M_S5.4 earthquake were determined by using the CAP(Cut and Paste)method. Next, we compared the synthetic waveforms simulated by F-K forward method of different focal depth models with the actual observed waveforms. According to the difference of arrival times between sPL and Pg phases, we finally obtained the focal depth of Cangwu earthquake. The results show that the focal depth is 11km measured by CAP method and 9km by sPL phase method. Based on the focal mechanism solution, isoseismal shapes, aftershocks distributions and investigation on spot, we conclude that the Cangwu M_S5.4 earthquake is a left-lateral strike-slip earthquake which occurred in the upper crust. Our preliminary analysis considers that the seismogenic structure of Cangwu earthquake is a north-northwest branch fault, and the control fault of this earthquake is the Hejie-Xiaying Fault.  相似文献   

RELOCATION OF THE 23 NOVEMBER 2017 WULONG M_S5.0 EARTHQUAKE SEQUENCE AND ANALYSIS OF ITS SEISMOGENIC FAULT          下载免费PDF全文

LI Cui-ping  TANG Mao-yun  GUO Wei-ying  HUANG Shi-yuan  WANG Xiao-long  GAO Jian 《地震地质》2019,41(3):603-618

The Wulong M_S5.0 earthquake on 23 November 2017, located in the Wolong sap between Wenfu, Furong and Mawu faults, is the biggest instrumentally recorded earthquake in the southeastern Chongqing. It occurred unexpectedly in a weak earthquake background with no knowledge of dramatically active faults. The complete earthquake sequences offered a significant source information example for focal mechanism solution, seismotectonics and seismogenic mechanism, which is helpful for the estimation of potential seismic sources and level of the future seismic risk in the region. In this study, we firstly calculated the focal mechanism solutions of the main shock using CAP waveform inversion method and then relocated the main shock and aftershocks by the method of double-difference algorithm. Secondly, we determined the seismogenic fault responsible for the M_S5.0 Wulong earthquake based on these calculated results. Finally, we explored the seismogenic mechanism of the Wulong earthquake and future potential seismic risk level of the region. The results show the parameters of the focal mechanism solution, which are:strike24°, dip 16°, and rake -108° for the nodal plane Ⅰ, and strike223°, dip 75°, and rake -85° for the nodal plane Ⅱ. The calculations are supported by the results of different agencies and other methods. Additionally, the relocated results show that the Wulong M_S5.0 earthquake sequence is within a rectangular strip with 4.7km in length and 2.4km in width, which is approximately consistent with the scales by empirical relationship of Wells and Coppersmith(1994). Most of the relocated aftershocks are distributed in the southwest of the mainshock. The NW-SE cross sections show that the predominant focal depth is 5~8km. The earthquake sequences suggest the occurrence features of the fault that dips northwest with dip angle of 63° by the least square method, which is largely consistent with nodal planeⅡof the focal mechanism solution. Coincidentally, the field outcrop survey results show that the Wenfu Fault is a normal fault striking southwest and dipping 60°~73° by previous studies. According to the above data, we infer that the Wenfu Fault is the seismogenic structure responsible for Wulong M_S5.0 earthquake. We also propose two preliminary genetic mechanisms of "local stress adjustment" and "fluid activation effect". The "local stress adjustment" model is that several strong earthquakes in Sichuan, such as M8.0 Wenchuan earthquake, M7.0 Luzhou earthquake and M7.0 Jiuzhaigou earthquake, have changed the stress regime of the eastern margin of the Sichuan Basin by stress transference. Within the changed stress regime, a minor local stress adjustment has the possibility of making a notable earthquake event. In contract, the "fluid activation effect" model is mainly supported by the three evidences as follows:1)the maximum principle stress axial azimuth is against the regional stress field, which reflects NWW-SEE direction thrusting type; 2)the Wujiang River crosscuts the pre-existing Wenfu normal fault and offers the fluid source; and 3)fractures along the Wenfu Fault formed by karst dissolution offer the important fluid flow channels.  相似文献   

STUDY ON FOCAL DEPTH OF THE M_S5.4 CANGWU EARTHQUAKE IN GUANGXI          下载免费PDF全文

ZHAO Tao  CHU Ri-sheng  NI Si-dao  WANG Ying  ZHOU Yong  ZENG Xiang-fang 《地震地质》2019,41(3):619-632

On July 31th, 2016, a magnitude 5.4 earthquake struck Cangwu Country, Guangxi Zhuang Autonomous Region, it was the largest earthquake recorded by Guangxi Seismological Network since it set up. The number of people affected by the earthquake had reached 20 000, and the direct economic losses caused by the earthquake were nearly 100 million Yuan. After the earthquake, USGS provided a global earthquake catalog showing that the focal depth of Cangwu earthquake was about 24.5km. However, the result given by the Global Centroid Moment Tensor showed the focal depth of this earthquake was 15.6km. However, the result obtained by Xu Xiaofeng et al. using CAP method was 5.1km. It was clear that the focal depths of Cangwu earthquake given by different institutions were quite different from each other. However, accurate focal depth of the earthquake has important significance for exploring the tectonic mechanism near the epicenter, so it is necessary to further determine the more accurate depth of the Cangwu earthquake. In order to further accurately determine the focal depth of Cangwu earthquake, we used the global search method for travel-time residual to calculate the focal depth of this earthquake and its error range, based on the regional velocity model, which is a one-dimensional velocity model of the Xianggui tectonic belt produced by the comprehensive geophysical profile. Then, we inverted the focal mechanism of this earthquake with the CAP method. Based on this, the focal depth of Cangwu M_S5.4 earthquake was further determined by the method of the Rayleigh surface wave amplitude spectrum and the sPL phase, respectively. Computed results reveal that the focal depth of this earthquake and its error range from the travel-time residual global search method is about(13±3)km, the focal depth inverted by CAP method is about 10km, the focal depth from sPL phase is about 10km, and the focal depth from Rayleigh surface wave amplitude spectrum is about 9~10km. Finally, we confirmed that the focal depth of Cangwu M_S5.4 earthquake is about 10km, which indicates that this earthquake still occurred in the upper crust. In the case of low network density, the sPL phase and Rayleigh wave amplitude spectrum recorded by only 1 or 2 broadband stations could be used to obtain more accurate focal depth. The focal depth's accuracy of Cangwu M_S5.4 earthquake in the USGS global earthquake catalog has yet to be improved. In the future, we should consider the error of the source parameters when using the USGS global earthquake catalog for other related research.  相似文献   

VARIATION OF THE TRAVEL TIME DIFFERENCE BETWEEN TELESEISMIC PS CONVERTED WAVE AND PP TRANSMITTED WAVE IN FOCAL REGION BEFORE AND AFTER WENCHUAN M_S8.0 EARTHQUAKE          下载免费PDF全文

SONG Chun-yan  SHAO Xue-zhong  MA Jin 《地震地质》2019,41(3):726-742

When P waves from distant earthquakes meet a velocity discontinuity in the earth's crust and upper mantle, they give rise to a series of converted PS waves besides PP refracted waves. It is possible to monitor the variation of the physical properties of the medium in the limited formation space above the transition zone of the seismogenic zone by measuring the time difference between the teleseismic PS converted wave and the first arrival P wave, that is, time-variation Δt_PS=t_PS-t_P. The advantage of this method is that the transition point of the teleseismic source with similar source is relatively stable at the transition interface, and the accuracy of the measured relative time is high, and the change of the medium in a small range of the seismogenic zone above the conversion interface can be monitored. This paper studies the variation of the travel time difference Δt_PS in focal region before and after Wenchuan M_S8.0 earthquake. We select 2001 to 2012 as the research period, use teleseismic waveforms which occurred in the southern region of Sumatra and Hindu Kush area recorded by Sichuan station YZP and JJS. These teleseisms satisfy 5.0 ≤ M ≤ 6.5, and their waveform signal-to-noise ratio is high with clear initial P-wave motion. The epicentral distance of teleseisms is less than 3 degrees. Then we obtain the variation of the travel time difference Δt_PS between teleseismic PS converted wave and PP transmitted wave recorded during the study period in the two stations. The results show that there is a slow increasing trend of Δt_PS before 2006, and an obvious low value process of Δt_PS appeared in the period about 2 years before the Wenchuan earthquake. The maximum decline was about 0.2~0.3s, more than 4~5 times the measurement error. The low value has a certain degree of return about 2~3 months before the earthquake. The change of arrival time difference indicates that the medium is in different states in different periods of seismogenic process. The sharp decrease in Δt_PS from 2006 to January 2008 may be due to the strong disturbance caused by the stress accumulation of the medium. At this stage, the velocity of P wave and S wave increases with the increase of stress, and the increase of S wave velocity will result in the decrease of Δt_PS. The change of Δt_PS is greatly affected by S wave velocity, so Δt_PS appears to decrease rapidly. Regarding the low value that has a certain degree of return about 2~3 months before the Wenchuan earthquake, the possible reason is that the release of stress is much higher than the accumulation of stress in meta-instability stage. At this stage, the velocity of S wave decreases and the decrease of S wave causes Δt_PS to increase. Then, the Wenchuan earthquake of magnitude 8.0 occurred. It is shown that the teleseismic converted wave method in this paper can monitor the variation of medium's wave velocity before large earthquakes, and it has a good prospect in seismic monitoring and worth further experimental study.  相似文献   

CHARACTERISTICS OF SATELLITE GRAVITY FIELD AND SEISMOGENIC MECHANISM IN THE LONGMENSHAN FAULT ZONE          下载免费PDF全文

TANG Jing-tian  YANG Lei  REN Zheng-yong  HU Shuang-gui  XU Zhi-min 《地震地质》2019,41(5):1136-1154

Longmenshan fault zone is a famous orogenic belt and seismic zone in the southeastern Tibetan plateau of China. The Wenchuan M_S8.0 earthquake on May 12, 2008 and the Ya'an M_S7.0 earthquake on April 20, 2013 occurred in the central-southern part of Longmenshan fault zone. Because of its complex geological structures, frequent earthquakes and special geographical locations, it has attracted the attention of many scholars around the world. Satellite gravity field has advantages in studying gravity field and gravity anomaly changes before and after earthquake. It covers wide range, can be updated regularly, without difficulty in terms of geographical restrictions, and is not affected by environmental factors such as weather, terrain and traffic. Therefore, the use of high-precision Earth satellite gravity field data inversion and interpretation of seismic phenomena has become a hot topic in earth science research. In order to understand satellite gravity field characteristics of the Longmenshan earthquake zone in the southeastern Tibetan plateau and its seismogenic mechanism of earthquake disasters, the satellite gravity data was used to present the terrain information of the study area. Then, by solving the regional gravity anomaly of the Moho surface, the crustal thickness of the study area was inverted, and the GPS velocity field data was used to detect the crustal deformation rate and direction of the study area. Combining the tectonic setting of the Longmenshan fault zone and the existing deep seismic sounding results of the previous researchers, the dynamic characteristics of the gravity time-varying field after the earthquake in the Longmenshan earthquake zone was analyzed and the mechanism of the earthquake was explored. The results show that the eastward flow of deep materials in the eastern Tibetan plateau is strongly blocked at the Longmenshan fault zone. The continuous collision and extrusion process result in a "deep drop zone" in the Moho surface, and the long-term stress effect is conducive to the formation of thrust-nappe and strike-slip structures. The Longmenshan earthquake zone was in the large-scale gradient zone of gravity change before the earthquake, the deep plastic fluid material transport velocity differed greatly, the fluid pressure was enhanced, and the rock mechanical strength in the seismic source region was weakened, which contributed to the intrusion of crustal fluid and the upwelling of the asthenosphere. As a result, the continuous accumulation of material and energy eventually led to continuous stress imbalance in the deep part and shear rupture of the deep weak structure, causing the occurrence of the thrust-nappe and strike-slip earthquake.  相似文献   

CHARACTERISTICS OF TECTONIC STRESS FIELD OF THE XIAOWAN RESERVOIR BEFORE AND AFTER THE IMPOUNDMENT          下载免费PDF全文

HUANG Hao  FU Hong 《地震地质》2019,41(6):1413-1428

Using the seismic waveform data of Xiaowan seismic network and Yunnan seismic network, we determined the focal mechanisms of 36 earthquakes(M_L ≥ 3.0)from Jun. 2005 to Dec. 2008 and 51 earthquakes(M_L ≥ 2.5)from Jan. 2009 to Dec. 2015 by generalized polarity and amplitude technique. We inverted tectonic stress field of the Xiaowan reservoir before impounding, using the focal mechanisms of 36 earthquakes(M_L ≥ 3.0)from Jun. 2005 to Dec. 2008 and CAP solutions of 58 earthquakes(M_L ≥ 4.0)collected and the solutions in the Global Centroid Moment Tensor(GCMT)catalog; We inverted local stress field of the reservoir-triggered earthquake clustering area, using 51 earthquakes(M_L ≥ 2.5)from Jan. 2009 to Dec. 2015. Focal mechanisms statistics show that, the Weixi-Qiaohou Fault is the seismic fault. Focal mechanisms were strike-slip type in initial stage, but normal fault type in later stage. Focal depths statistics of 51 earthquakes(M_L ≥ 2.5)show that, the average value of focal depths in period Ⅰ, period Ⅱ and period Ⅲ are 8.2km, 7.3km and 7.8km respectively and the standard deviations are 4.3km, 3.5km and 6.0km respectively. The average value of focal depths is basically stable in different period, only the standard deviation is slightly different. Therefore, there is not positive connection between focal depth and deviation of focal mechanisms. What's more, there are 2 earthquakes(number 46 and number 47 in Fig.5 and Table 3)with almost the same magnitude, epicenter and focal depth, but they have different faulting types as normal and strike-slip. The focal mechanism of event No.46 is strike:302°, dip:40° and rake:-97° for plane Ⅰ, however, the focal mechanism of event No.47 is strike:292°, dip:82° and rake:140° for plane Ⅰ. Likewise, earthquake of number 3 and number 18 have similar characteristic. Therefore, the obvious focal mechanism difference of similar earthquake pair indicates the complexity of Weixi-Qiaohou Fault. Considering the quiet-active character of reservoir-triggered earthquakes, we discussed the change of local stress field in different period. The σ₁ of tectonic stress field was in the near-south direction, with a dip angle of 14° before the impoundment, however, the direction of σ₁ of local stress field changed continuously, with the dip angle getting larger after the impoundment. The direction of σ₁ of local stress field of reservoir-triggered earthquake clustering area is close to the strike of Weixi-Qiaohou Fault, and reservoir impoundment increased the shear stress in the fault, so the weakening of fault was beneficial to trigger earthquakes. Comprehensive analysis suggests that fluid permeation and pore pressure diffusion caused by the water impounding, and the weakening of fault caused by local stress field are the key factors to trigger earthquake in the Xiaowan reservoir.  相似文献   

A Review of the Calculation Formula for the Four-component Borehole Strainmeter and Application to Earthquake Cases   总被引：1，自引：0，他引：1  

SU Kaizhi 《中国地震研究》2019,33(1):132-146

Based on the principle formula for the four-component strainmeters, we can directly obtain the specific plane strain, shear strain and azimuthal angle of the principal strain, and the maximum and minimum principal strains calculated afterwards are the indirect result. The problems of practicality of the sensitivity coefficients A and B of plane strain and shear strain are then discussed. Based on this idea, we analyzed the observation data of several four-component borehole strainmeters near the epicenter of the Yiliang M_S5.7 earthquake in 2012 and the Ludian M_S6.5 earthquake in 2014 in the Zhaotong area, Yunnan Province. The results show that the analysis based on the perspective of plane strain and shear strain has an obviously better effect than that based on the component readings, and can directly peel off the respective abnormality of the plane strain and shear strain. In addition, the correlation coefficient curves between measured data of two plane strains show significant anomalies which often occur several days before and during the earthquake.  相似文献   

A Preliminary Analysis of the Seismogenic Structure of the Akto MS6.7 Earthquake Sequence on November 25, 2016     

LIANG Shanshan  XU Zhiguo  CHEN Hongfeng  ZOU Liye  LIU Jingguang 《中国地震研究》2019,33(3):418-430

In this study,data from the Xinjiang regional network and IRIS shared global stations are used to relocate the Akto M_S6. 7 earthquake sequence on November 25,2016 by using double difference location method. Three earthquakes of M_S4. 8,M_S6. 7 and M_S5. 0 are inverted by using the g CAP method,and the focal mechanism solutions are obtained.According to the results of relocating,the location of the main shock is 39. 22°N,73. 98°E,the distribution of the earthquake sequence is about 70 km in length,and the focal depth is mainly within the range of 5-20 km. The plane and depth profiles of the earthquake sequence show that aftershocks extended in SEE direction after the main shock and the dip angle of fault plane is steep. Focal mechanism results show that the three earthquakes are characterized by strike-slip movement. Based on the results of field geological investigation,it is inferred that the seismogenic fault of the Akto earthquake is Muji fault,which is located at the northernmost end of the Kongur extensional system.The possible cause of this earthquake is that the Indian Plate continues to push northward,and during this compression process,the Indian Plate is affected by the clockwise rotation of the Tarim basin,which causes the accumulation of right-lateral action of the Muji fault,resulting in this earthquake.  相似文献